Differences in Orthodontic Thermal Deflection of Nickel Titanium Wire in Artificial Saliva Soat And Isotonic Beverages

Budi Suhartono*    -  Departement of Orthodontic, Universitas Islam Sultan Agung, Indonesia
Moh Yusuf  -  Faculty of Dentistry, Universitas Islam Sultan Agung, Indonesia
Grahita Aditya  -  Faculty of Dentistry, Universitas Islam Sultan Agung, Indonesia
Erdianto Setya Wardhana  -  Faculty of Dentistry, Universitas Islam Sultan Agung, Indonesia
Eko Hadianto  - 
Fathimah Fitria Sa’adah  -  Faculty of Dentistry, Universitas Islam Sultan Agung, Indonesia

(*) Corresponding Author
DOI: 10.30659/odj.12.1.75-83

Background: Deflection is one of the properties of the wire that can change if the environmental conditions in the oral cavity are acidic, caused by consuming isotonic drinks. This study aims to determine the difference in deflection of thermal nickel-titanium wire soaked in artificial saliva and isotonic drinks.

Method: The type of research used was an in vitro experimental analytic study with a post-only control group design method. The sample used was 36 thermal nickel titanium wire (American Orthodontics) with a wire size of 0.016 inches and divided into 2 groups consisting of the artificial saliva group and the isotonic drink group. Soaking was carried out for 10.5 hours and stored in an incubator at 37oC, then a deflection test was carried out using a Universal Testing Machine. Analysis of the results was carried out using the Independent T-Test in each group after treatment.

Result: The results of the study using the Independent T-Test showed a significant difference in the deflection value of the thermal nickel titanium wire in the artificial saliva group and the isotonic drink group of 0.000 (p<0.05).

Conclusion: The conclusions obtained in this study indicate that thermal immersion of nickel-titanium wire in the artificial saliva group and the isotonic drink  group  affects  the  deflection  force  in  orthodontic  treatment.

Keywords: Orthodontic;Thermal Deflection; Nickel Titanium Wire; Saliva Soat,;Isotonic Beverange

  1. H. N. Perwira, “Frekuensi kebutuhan perawatan ortodontik berdasarkan Index of Orthodontic Treatment Need di SMP Negeri 1 Salatiga,” Jurnal Ilmu Kedokterran Gigi, vol. 1, no. 1, pp. 1–11, 2017.
  2. Herwanda, R. Arifin, and Lindawati, “Pengetahuan Remaja Usia 15-17 Tahun Di Sman 4 Kota Banda Acehterhadap Efek Samping Pemakaian Alat Ortodonti Cekat,” J Syiah Kuala Dent Soc, vol. 1, no. 1, pp. 79–84, 2016.
  3. C. H. Khairusy, R. Adhani, and D. Wibowo, “HubunganTingkat Pengetahuan Responden Dengan Pemilihan Operator Selain Dokter Gigi Ditinjau dari Bahaya Pemasangan Alat Ortodontik,” Dentino Jurnal Kedokteran Gigi, vol. II, no. 2, pp. 166–169, 2017.
  4. T. Alawiyah, “Komplikasi dan resiko yang berhubungan dengan perawatan ortodonti,” Jurnal Ilmiah Widya, vol. 4, no. 1, pp. 256–261, 2017.
  5. T. Demmajannang and E. Erwansyah, “Gambaran indeks Bolton pada pasien yang dirawat dengan piranti ortodontik lepasan di Rumah Sakit Gigi Mulut Universitas Hasanuddin Overview of Bolton index on patients treated with removable orthodontic appliance in Dental Hospital of Hasanuddin Universit,” Journal of Dentomaxillofacial Science, vol. 12, no. 3, p. 175, 2013, doi: 10.15562/jdmfs.v12i3.374.
  6. M. Nasir and Y. F. Ramadhany, “Tele-orthodontic as a recent solution in malocclusion treatment,” pp. 78– 81, 2020, doi: 10.35856/mdj.v9i2.322.
  7. R. Sekhar Kotha, R. Krishna Alla, M. Shammas, and R. Krishna Ravi, “An Overview of Orthodontic Wires,”
  8. Trends Biomater. Artif. Organs, vol. 28, no. 1, pp. 32–36, 2014, [Online].
  9. C. Santiaji, Wetti Magdalena, Soekarsono Hardjono, “Pengaruh Jarak Dan Lama Peregangan Terhadap Besar Dan Penurunan Gaya Tarik Closed Coil Spring Nikel Titanium,” Kedokteran gigi, vol. 4, pp. 204–210, 2013.
  10. J. M. Khatri and V. P. Mehta, “Evaluation of Force Deflection Properties of Various Types of Initial Orthodontic Archwires,” J Indian Orthod Soc, vol. 48, no. 4, pp. 309–312, 2014, doi: 10.5005/jp-journals- 10021-1266.
  11. S. M. Castro, M. J. Ponces, J. D. Lopes, M. Vasconcelos, and M. C. F. Pollmann, “Orthodontic wires and its corrosion - The specific case of stainless steel and beta-titanium,” J Dent Sci, vol. 10, no. 1, pp. 1–7, 2015, doi: 10.1016/j.jds.2014.07.002.
  12. H. S. Hasyim, L. S. Devi, and A. Sumono, “Pengaruh Perendaman Kawat Nikel-Titanium Termal Ortodonti dalam Minuman Teh Kemasan terhadap Gaya Defleksi Kawat ( The Effect of Immersion Thermal Nickel- Titanium Archwire in The Bottled Tea Drinks to The Archwire Force Deflection ),” e-Jurnal Pustaka Kesehatan, vol. 4, no. 2, p. 347, 2016.
  14. C. A. Mawaddah, L. S. D. A., and D. Prijatmoko, “Perbedaan Defleksi Kawat Ortodonti Nikel-Titanium dan NiTi Epoxy Resin Coated pada Perendaman dalam Saliva Buatan dan Minuman Berkarbonasi,” Pustaka Kesehatan, vol. 4, no. 3, pp. 519–524, 2016.
  15. H. Aghili, S. Yasssaei, M. N. Ahmadabadi, and N. Joshan, “Load Deflection Characteristics of Nickel Titanium Initial Archwires.,” J Dent (Tehran), vol. 12, no. 9, pp. 695–704, 2015, [Online]. Available: http://www.ncbi.nlm.nih.gov/pubmed/27148381%0Ahttp://www.pubmedcentral.nih.gov/articlerender.fcgi?a rtid=PMC4854749
  16. P. Arifiani, “STUDI PUSTAKA Karakteristik kawat TMA ( titanium molybdenum alloy ) dan penggunaannya dalam perawatan ortodonti Putri Arifiani* dan Erwin Siregar**,” pp. 163–171, 1979.
  17. R. Sakaguchi, J. Ferracane, and J. Powers, Craig’s Restorative dental materials, Fourteenth., vol. 71, no.
  18. Elsevier Inc., 2012. doi: 10.1016/s0002-9416(77)90403-1.
  19. E. Gatto, G. Matarese, G. Di Bella, R. Nucera, C. Borsellino, and G. Cordasco, “Load-defl ection characteristics of superelastic and thermal nickel-titanium wires,” Eur J Orthod, vol. 35, no. 1, pp. 1–9, 2013, doi: 10.1093/ejo/cjr103.
  20. S. Premkumar, Textbook of ORTHODONTICS. ELSEVIER, 2015.
  21. A. Triawan, “Pengaruh Sel Galvanik Kawat Busur Ortodontik Cekat Australia dan Nikel Titanium dengan Amalgam terhadap Pelepasan Ion Nickel : Studi Laboratoris pada Lingkungan Saliva Tiruan dengan pH Normal,” vol. 7, no. 2, pp. 69–75, 2010.
  22. J. Misael, A. Suprihanto, and G. D. Haryadi, “Pengujian Laju Korosi Pada Perangkat Ortodontik Dengan Material Stainless Steel 316l Pada Penerapan Larutan,” Jurnal Teknik Mesin, vol. 9, no. 2, pp. 205–214, 2021.
  23. Y. Wulandari, Yuri and N. Suhartatik, “Stabilitas Minuman Isotonik Kelopak Bunga Rosela Ungu (Hibiscuss Sabdariffa) selama Penyimpanan,” JOGLO, Vol. 28, no. 1, pp. 42–50, 2015, [Online]. Available: http://www.elsevier.com/locate/scp
  24. N. p Wasono, Y. A. Assa, and P. s Anindita, “Pelepasan Ion Nikel Dan Kromium Bracket Stainless Stell Yang Direndam Dalam Minuman Isotonik,” E-Gigi, Vol. 5, No. 1, Pp. 158–163, 2016, Doi: 10.35790/Eg.3.2.2015.10011.
  25. M. R. G. Silva, T. Paiva, and H. H. Silva, The impact of sports and energy drinks in performance. Elsevier Inc., 2019. doi: 10.1016/B978-0-12-815851-7.00006-1.
  26. M. M. Bonde and P. S. Anindita, “Uji Pelepasan Ion Logam Nikel (Ni) Dan Kromium (Cr) Kawat Ortodontik Stainless Steel Yang Direndam Dalam Air Kelapa,” Pharmacon, vol. 5, no. 4, pp. 40–45, 2016.
  27. N. Afrianti, I. Erlita, and R. Adhani, “Isotonic Beverage Effect on Surface Hardness of Bulkfill Type Composite Resin,” Dentino (Jur. Ked. Gigi)J Ked Gi, vol. IV, no. 2, pp. 130–134, 2019.
  28. A. Angeline, N. Djustiana, and N. Nazruddin, “

    Perbedaan pelepasan ion nikel kawat SS ortodonti yang direndam dalam obat kumur ekstrak buah mengkudu (Morinda Citrifolia L.) dengan konsentrasi berbeda

  29. Differences of the nickel ions release of orthodontic SS wire immersed in various concentrat,” Padjadjaran Journal of Dental Researchers and Students, vol. 5, no. 2, p. 110, 2021, doi: 10.24198/pjdrs.v5i2.33407.
  30. A. Kurniawan, T. D. Putra, and A. Farid, “Pengaruh Jumlah Plat Besi Terhadap Defleksi Pembebanan Pada Pengujian Superposisi,” Widya Teknika, vol. 24, no. 2, pp. 1–5, 2016.
  31. L. Casanova et al., “Investigating the activation of passive metals by a combined in-situ AFM and Raman spectroscopy system: a focus on titanium,” Sci Rep, vol. 13, no. 1, p. 6117, 2023, doi: 10.1038/s41598-023- 33273-1.
  32. B. Wibowo, J. Heryumani, and D. Dyah Karunia, “Pengaruh Besar Kompresi Dan Lama Perendaman Dalam Saliva Buatan Terhadap Kekuatan Open Coil Spring Nikel Titanium,” Jurnal Kedokteran Gigi, vol. 6, no. 4,
  33. pp. 327–333, 2015.
  34. Sumarji, “Studi Perbandingan Ketahanan Korosi Stainless Steel Tipe Ss 304 Dan Ss 201 Menggunakan Metode U-Bend Test Secara Siklik Dengan Variasi Suhu Dan Ph,” Jurnal ROTOR, vol. 4, no. 1, pp. 1–8, 2011.
  35. Gunawarman, Ilhamdi, V. Martin, J. Affi, and L. Aidil, “Karakteristik Mekanik dan Struktur Mikro Kawat Titanium sebagai Fungsi Tingkat Deformasi untuk Aplikasi Restorasi Gigi,” no. Snttm Xiii, pp. 15–16, 2014.
  36. A. Wijaya, F. H. Nasution, R. Tjandrawinata, and Y. Yusra, “Perbandingan Komposisi Unsur Piranti Retensi Nikel Titanium dengan Nikel Titanium Superelastic dan Uji Sifat Kelelahan Logam,” Jurnal Teknik Mesin, Vol. 2, no. 1, pp. 23–31, 2018.

Lisensi Creative Commons
This work is licensed under a Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.
Contact us: Odonto Dental Journal: Jl. Raya Kaligawe Km.4, PO BOX 1054/SM Semarang, Central Java, Indonesia, 50112. Email: odontodentaljournal@unissula.ac.id
apps