ANALISA KARAKTERISTIK DAN STABILITAS MARSHALL ASBUTON LGA 50/30 UNTUK LASTON LAPIS AUS ASBUTON BUTIR (AC-WC ASB. BUTIR)

Authors

DOI:

https://doi.org/10.30659/pondasi.v30i1.44086

Keywords:

Laston AC-WC, Asbuton, Marshall stability

Abstract

Asphalt use for road construction is 1,2 million tons a year, domestic production only supplied 0.6 million tons the remaining needs are supported by imports. Asbuton has been uknwon for better adhesive quality than regular oil asphalt. The research aims to find the Marshall stability value by observing the characteristics of Asbuton LGA 50/30 for Asphalt Concrete-Wearing Course Asbuton Granular (AC-WC Asb. Granular) with 5 (five) different Asbuton variants and to find the cost difference in the production of Asphalt Concrete-Wearing Course Asbuton Granular (AC-WC Asb. Granular) compared to the production cost of AC-WC oil asphalt using experimental research methods. The characteristics of Asphalt Concrete-Wearing Course Asbuton Granular (AC-WC Asb. Granular) are higher than AC-WC from regular oil asphalt; visually, the AC-WC with Asbuton addition results in a matte color mixture compared to AC-WC Granular with oil asphalt which Asphalt Concrete-Wearing Course Asbuton Granular has a darker and more glossy black color. From the samples that have been tested, at optimum asphalt content level 6% and the amount of Asbuton used at 7.5%, the Marshall results are: VIM 4.51%, VFB 73.76%, Marshall Stability 1,614 Kg, Flow 2.6 mm, MQ 601.3 Kg/mm, and Residual stability after 24-hour immersion 92.79%. Using Asbuton in the mixture for Laston AC-WC can save production costs by 1.33%.


Author Biographies

  • Listia Ayu Ningrum, Sultan Agung Islamic University
    ENGINEERING FACULTY
  • Soedarsono Soedarsono, Sultan Agung Islamic University
    ENGINEERING FACULTY
  • Hermin Poedjiastoeti, Sultan Agung Islamic University
    ENGINEERING FACULTY

References

Angka, A. B., & Kushari. (2018). Pengaruh Penggunaan Asbuton Lawele Terhadap Karakteristik Campuran Ac-Bc Dengan Durasi Perendaman. Prosiding Seminar Hasil Penelitian (SNP2M) 2018, 2018, 75–81.

Arfan, I. A. (2018). Studi Eksperimental Penentuan Kadar Aspal Buton Optimum Tipe Lga 50/30 Menggunakan Agregat Batu Gamping.

Direktorat Jenderal Bina Marga. (2018). Spesifikasi Umum 2018 Revisi 2. Edaran Dirjen Bina Marga Nomor 02/SE/Db/2018, Revisi 2, 6.1-6.104.

Erizal. (2018). Pengaruh Temperatur Terhadap Karakteristik Laston AC – WC Menggunakan Asbuton Modifikasi JBMA – 50 dan Aspal Minyak. Pasca Sarjana Universitas Islam Riau.

Haikal, M. F., Jasman, & Widarto, H. (2024). Analisa Pengaruh Variasi Penggabungan Asbuton dan Aspal Minyak Terhadap Campuran AC-BC. Jurnal KARAJATA ENGINEERING, 4(2), 161–170.

Hasriana, T. (2018). Menguji Kadar Aspal Buton (ASBUTON) Dengan Ekstraksi Menggunakan Metode Sokhlet Di PT. Wika Bitumen Sulawesi Tenggara.

Kementrian Pekerjaan Umum. (2007). Pedoman Pelaksanaan Lapis Campuran Beraspal Panas.

Kementrian Pekerjaan Umum dan Perumahan Rakyat. (2018). Peraturan Mentri Pekerjaan Umum dan Perumahan Rakyat Tentang Penggunaan Aspal Buton Untuk Pembangunan Preservasi Jalan. 18/PRT/M/2.

Qamar, L. M. S., & Agus, I. (2022). Karakteristik Uji Marshall Campuran Asbuton Tipe Lawele Bitumen Rendah Menggunakan Modifier Aspal Lawele. Jurnal Media Inovasi Teknik Sipil UNIDAYAN, 11(1), 40–45. https://doi.org/10.55340/jmi.v11i1.827

Rizal, M. (2016). Ekstraksi dan Karakteristik Aspal Buton Sebagai Aditif Formulasi Aspal Lokal. In Skripsi Universitas Islam Negeri Syarif Hidayatullah Jakarta.

Setiawan, A. (2011). Studi penggunaan asbuton butir terhadap karakteristik marshall. Jurnal SMARTek, 9, 11–27.

Sumiati, Mahmuda, & Puryanto. (2019). Keunggulan Asbuton Pracampuran Dan Aspal Shell Pada Campuran Aspal Beton (Ac-Bc). In Jurnal Poli-Teknologi (Vol. 18, Issue 1). https://doi.org/10.32722/pt.v18i1.1289

Wijayanto, I. (2013). Ekstraksi Asbuton Dengan Metode Asbuton Emulsi Menggunakan Emulgator Cocamide Dea Ditinjau Dari Konsentrasi H2O Dan Waktu Ekstraksi.

Downloads

Published

2026-05-18

Issue

Section

Articles