The effect of sodium borate addition to dimentional stability in type 3 of gypsum
DOI:
https://doi.org/10.30659/medali.5.1.22-27Kata Kunci:
gypsum type III, sodium borate, dimensional stabilityAbstrak
Background: The removable dentures or fixed dentures can be used as a replacement for missing teeth and restore the aesthetics and functional condition of the patien. Dentures with good adaptation can be obtained from accurate impressions. Dimensional accuracy and adequate mechanical properties are one of the main requirements of working model making materials. The addition of sodium borate can help gypsum type III achieve balance dimentional stability. The purpose of this study was to determine the difference in dimensional stability of gypsum type III with aquades with the addition of sodium borate and aquades without the addition of sodium borate.
Method: Post test only control group design was used as the research design method. This study consisted of 2 groups with a total sample of 32 samples, experimental group with gypsum type III given distilled water with added sodium borate 0.4% and control group with gypsum type III given distilled water without added sodium borate 0.4%. The change of gypsum dimentional stability is measured using digital sliding caliper. Statistical tests were carried out using the Mann Whitney test and the results of the Mann Whitney test were P < 0.05 which means a significant difference between the two groups.
Result: The lowest average dimensional change was found in gypsum type III mixed with 0.4% sodium borate.
Conclusion: The conclusion of the research is the addition of 0,4% sodium borate solution can help gypsum type III achieve balance dimentional stability.
Referensi
Lontaan J, Siagian KV, Pangemanan DHC. Pola Kehilangan Gigi Pada Pasien Gigi Tiruan Sebagian Lepasan Di Rumah Sakit Gigi Dan Mulut Program Studi Pendidikan Dokter Gigi Fakultas Kedokteran Universitas Sam Ratulangi. JKK (Jurnal Kedokt Klin. 2017;1(3):1–8.
Mangundap GCM, Wowor VNS, Mintjelungan CN. Efektivitas Penggunaan Gigi Tiruan Sebagian Lepasan terhadap Fungsi Pengunyahan pada Masyarakat Desa Pinasungkulan Kecamatan Modoinding. e-GIGI. 2019;7(2):81–6.
Muchtar M, Habar ID. Functional Impression Technique for Making Complete Denture In Flat-Ridge Patient. Makassar Dent J. 2019;8(1):16–21.
Budiono, Susilaningsih E, Fatmasari D. Pengembangan Instrumen Penilaian Kinerja Keterampilan Mencetak Rahang Bergigi Teknik Mukostatik. J Res Educ Res Eval. 2016;5(1):49–56.
Anusavice KJ, Chiayi Shen, Rawls HR. Phillips’ Science of Dental Materials. 12th ed. Chiayi Shen, H. Ralph Rawls KJA, editor. Elsevier Health Sciences. St. Louis: Elsevier Health Sciences; 2013. 592 p.
Sari WP, Yandi S, Chairunnisa F. Uji Komposisi Gipsum Tipe Iii Pabrikan Dan Gipsum Tipe Iii Daur Ulang Dengan Teknik X-Ray Fluoresence Spectrometer (Xrf) Dalam Upaya Pemanfaatan Limbah Gipsum Kedokteran Gigi. Menara Ilmu. 2021;XV(01):1–5.
Powers J, Wataha J. Dental Material Foundation and Application. Chen Y, editor. ELSEVIER; 2017. 120 p.
McCabe JF, Walls AWG. Applied Dental Materials. 9th ed. blackwell; 2008.
William DB. Materials Science for Dentistry. 10th ed. Overend L, editor. india: Matthew Deans; 2018.
ADA. Revised American Dental Association Specification no. 19 for Non-aqueous, Elastomeric Dental Impression Materials. J Am Dent Assoc [Internet]. 1977;94(4):733–41. Available from: http://dx.doi.org/10.14219/jada.archive.1977.0334
Fraunhofer JA von. Dental Materials at a Glance. 2nd ed. Vol. 54, Platinum Metals Review. 2013. 257–259 p.
Jiang W, Pan H, Tao J, Xu R, Tang R. Dual roles of borax in kinetics of calcium sulfate dihydrate formation. Langmuir. 2007;23(9):5070–6.
Ha YT, Nyan M. Effect Of Anti-Expansion Solution On Setting Expansion And Setting Time Of Dental Plaster. Myanmar Dent J. 2020;27(1).
Utama MD, Thalib B, Damayanti I, Jubhari EH, Waris R. Efek Penyemprotan Disinfektan Kelopak Bunga Rosella Pada Cetakan Rahang Terhadap Perubahan Dimensi Hasil Cetakan. 2016;1(1):54–61.
Susaniawaty Y, Dharma Utama M. Kegagalan estetik pada gigi tiruan cekat (Esthetic failure in fixed denture). Makassar Dent J. 2015;4(6):193–9.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

This work is licensed under a Creative Commons Attribution 4.0 International License.