THE EFFECT OF ADDITION NON DENTAL GLASS FIBER TOWARDS THE FLEXURAL STRENGTH OF NANOFIL RESIN COMPOSITE

Dessy Adhira Nur Safitri, Eko Hadianto, Erdianto Setya Wardhana

Abstract


Background: Resin composite is one of many materials that are often used in daily dental practice because of its convenience and high aesthetic value. Resin composite consists of various materials, one of them is nanofil resin composite. Some research has shown that non-fiber resin composite has poor flexural strength. Therefore, fiber (FRC) can be added to the resin composite as a reinforcing material.
Method: This study is based on a true-experimental, post-test only control group design with 16 specimen total of samples with 25x2x2 mm in the size. The samples were classified into two groups, the first group is the nanofil resin composite without the addition of non-dental glass fiber, and the second group is the nanofil resin composite with the addition of non-dental glass fiber. Data was tested using the parametric test, Independent T-test.
Result: The average result of the flexural strength of the nanofil resin composite group without the addition of non-dental glass fiber was 102.7725 Mpa. As for the nanofil resin composite group with the addition of non-dental glass fiber is 166.1100 Mpa. The results of the independent T-test showed p-value = 0.000.
Conclusion: It was found that nanofil resin composite with addition of non-dental glass fiber has a higher flexural strength than resin composite without addition of non-dental glass fiber so that it can be used as an alternative choice in applications in dentistry.


Keywords


Nanofil resin composit; non dental glass fiber; fiber reinforced composite; flexural strength

Full Text:

PDF

References


Irawan, B. (2012) “Peran Bahan Restorasi Kedokteran Gigi Dalam Keberhasilan Pembuatan Restorasi”, Makassar Dent. J., vol. 1, no. 4, pp. 6–14.

Ladiora, F., Sari, W. P dan Fadriyanti, O. (2016) “Pengaruh Penambahan Silane Pada Glass Fiber Non Dental Terhadap Presentase dan Volume Penyerapan Air Fiber Reinforced Composite,” J. B-Dental, vol. 3, no. 2, pp. 100–110.

Widuanti, P., Hadianto, E dan Kusuma, A. R. P. (2017) “Pengaruh Penambahan Fiber Polyethylene Terhadap Kekuatan Fleksural Resin Komposit Prepolymerized,” ODONTO Dent. J., vol. 4, no. 1, pp. 1–6.

Rosa, R. S., Balbinot, C. E. A., Blando, E., et al. (2012) “Evaluation of Mechanical Properties On Three Nanofilled Composites,” Stomatol. Balt. Dent. Maxillofac. J., vol. 14, no. 4, pp. 126–140.

Sonwane, S. R. and Hambire, U. V (2015) “Comparison of Flexural & Compressive Strengths of Nano Hybrid Composites,” Int. J. Eng. Trends Appl., vol. 2, no. 2, pp. 47–52.

Dhamaryanti, I., dan Nugraheni, T. (2013) “Restorasi Fiber Reinforced Composite Pada Gigi Premolar Pertama Kanan Mandibula Pasca Perawatan Saluran Akar,” Maj. Kedokt. Gigi, vol. 20, no. 1, pp. 65–70.

Faizah, A., W. dan N. (2016) “Pengaruh Komposisi Beberapa Glass Fiber Non Dental Terhadap Kelarutan Komponen Fiber Reinforced Composites,” Maj. Kedokt. Gigi Indones., vol. 2, no. 1, pp. 13–19.

Maulida, F., Sari, W. P., D. (2019) “Pengaruh Penambahan Silane Terhadap Kekuatan Fleksural Reinforced Composite Yang Diperkuat Dengan Glass Fiber Non Dental,” J. Kedokt. Gigi Unpad, vol. 31, no. 1, pp. 43–46.

Vallittu, P. and Ozcan, M. (2017) Guide to Principles of Fiber Reinforced Composite in Dentistry. India: Elsevier.

Amna, A. Z., Hadianto, E., dan Suhartono, B. (2020) “Pengaruh Penambahan Non Dental Glass Fiber Terhadap Kekuatan Fleksural Prepolymerized Fiber Reinforced Composite,” ODONTO Dent. J.

Cahyani, P. D, E dan Faizah, A. (2017) “Pengaruh Posisi Silkworm Fiber Terhadap Kekuatan Diametral Silkworm Fiber Reinforced Composite,” J. Ilmu Kedokt. Gigi, vol. 1, no. 2, pp. 5–9.

Mosharraf, R dan Haerian, A. (2011) "Push-Out Bond Strength Of A Fiber Post System With Two Resin Cements," Dental Research Journal, vol. 8, no. 5, pp. 88-93.

Septommy, C., Widjijono dan Dharmastiti, R. (2014) “Pengaruh Posisi dan Fraksi Volumetrik Fiber Polyethylene Terhadap Kekuatan Fleksural Fiber Reinforced Composite,” Dent. J. Maj. Kedokt. Gigi, vol. 47, no. 1, pp. 52–56.

Sumantri, D., S. dan Dahlia, H. (2015) “Pengaruh Orientasi dan Volumetrik Glass Fiber Non Dental Terhadap Kekuatan Perlekatan Geser Fiber Reinforced Composites Untuk Splinting Periodontal,” J. B-Dental, vol. 2, no. 1, pp. 1–9.

Ahmad, E. (2014) “Perbandingan Kekuatan Fleksural antara Orientasi Unidirectional dan Bidirectional Fiber Agave Sisalana pada Fiber Reinforced Composite,” J. Mater. Kedokt. Gigi, vol. 3, no. 2, pp. 62–66.

Murdiyanto, D. (2017) “Potensi Serat Alam Tanaman Indonesia Sebagai Bahan Fiber Reinforced Composite Kedokteran Gigi,” J. Mater. Kedokt. Gigi, vol. 6, no. 1, pp. 14–22.

Kaw, A. A. (2006) Mechanics of Composite Materials, 2 Ed. London: Taylor & Francis.

Anusavice, K. J., Shen, C dan Rawls, H. R. (2013) Phillip’s Science of Dental Materials, 12th ed. China: Elsevier.

Hadianto, E., Syifa, L. L., dan Hanafie, H. F. (2018) “Pengaruh Fraksi Volume Fiber Sisal (Agave Sisalana) Terhadap Kekuatan Fleksural Resin Komposit,” ODONTO Dent. J., vol. 5, no. 2, pp. 139–144.




DOI: http://dx.doi.org/10.30659/medali.4.1.59-64

Refbacks

  • There are currently no refbacks.