Utilization of Rice Husk Waste and Wood Powder as Filler in AC-WC Asphalt

Rizky Febrian Perdana, Bambang Supriyanto

Abstract


With the limited natural resources, it is necessary to implement a program to reduce the use of natural resources and maximize the potential generated from unutilized waste. The types of waste that can be utilized as filler in AC-WC asphalt are rice husk ash waste obtained from Gunungsari Village, Malang Regency and sawdust ash waste obtained from H. Sulaiman Brick Factory, Malang Regency. The purpose of this research is to identify the chemical content values contained in rice husk ash and wood powder ash waste in AC-WC asphalt pavement mixtures by reviewing through marshall parameters and the Residual Strength Index (IRS). The results of the utilization of rice husk ash filler in AC-WC asphalt mixtures can provide an increase in stability values until it finally decreases at 100% content, besides that it can provide an increase in the values of yield, VIM and VMA. However, it gives a decrease in the VFA value and produces an IRS of 90.6% and can meet the requirements of Bina Marga 2018 Revision 2. In the sawdust ash filler, it can give an increase in stability and yield values until the peak at 100%, but it can give a decrease in VIM and VMA values. However, it increases the VFA value and produces an IRS of 87.2% which does not meet the guidelines of Bina Marga 2018 Revision 2.

Keywords


rice husk ash, sawdust ash, filler, marshall parameters, residual strength index.

References


Purwahono, F. P. and Solichin, I. (2023). Analisa Pengaruh Beban Kendaraan Terhadap Sisa Umur Rencana Jalan Dengan Metode Bina Marga 2017 Pada Ruas Jalan Brigjend Katamso - Jalan Raya Berbek - Jalan Raya Wadung Asri (STA 0+000 – STA 5+000). Innov. J. Soc. Sci. Res., vol. 3, pp. 9919–9933.

Yang, X., Zhang, J., Liu, W., Jing, J., Zheng, H., & Xu, W. (2024). Automation in road distress detection, diagnosis and treatment. Journal of Road Engineering, September 2023. https://doi.org/10.1016/j.jreng.2024.01.005.

Jasim, A. A. (2014). By Using Waste Glass as Secondary Aggregates in Asphalt Mixtures. International Journal of Advanced Research, 2(1), 41–46.

Faturahman, F. N., Artiningsih, T. P., & Lirawati. (2022). Pengaruh pemanfaatan abu sekam padi sebagai pengganti sebagian semen terhadap kuat tekan beton. Teknik Sipil Universitas Pakuan, 2, 1–8.

Pujotomo, I. (2017). Potensi Pemanfaatan Biomassa Sekam Padi Untuk Pembangkit Listrik Melalui Teknologi Gasifikasi. Energi & Kelistrikan, 9(2), 1–23.

Deressa, B. F., Dinka, O. G., & Tefera, B. Y. (2021). Application of Sawdust Ash as Filler Material in Asphaltic Concrete Production. May. https://doi.org/10.2478/cee-2020-0035.

Pohan, S. A. (2019). Pengaruh Penambahan Abu Arang Kayu pada Aspal Porus terhadap Perkerasan Jalan. Teknik Sipil, 2(1).

Otoko, G. R., & Honest, B. K. (2014). Stabilization of Nigerian Deltaic Laterites with Saw Dust Ash. International Journal of Scientific Research and Management, 2(8), 1287–1292. https://doi.org/10.13140/2.1.4369.2805.

Osuya, D. O., & Mohammed, H. (2017). Evaluation of sawdust ash as a partial replacement for mineral filler in asphaltic concrete. Journal of Science, 19(2), 431–440.

Basri, D. R., Ramdhani, F., & Wardani, F. A. (2022). Pemanfaatan Abu Serbuk Kayu dan Semen Portland sebagai Filler pada Campuran Asphalt Concrete - Wearing Course. RAB Construction Research, 7(2).

Akter, R., Hossain, K., Anwar, S., & Rahman, K. (2022). Performance evaluation of coal dust and wood powder ash as alternates of conventional filler in the asphalt concrete. 4(1), 82–96.

Nofitri, N. (2019). Studi Sifat Termal dan Sifat Fisis Paduan Aspal dan Silika Sekam Padi dengan Komposisi Massa 1:1,5; 1:1,6; 1:1,7. Universitas Negeri Lampung, 8(5), 55.

Sari, K., Sunardi, S., Umana, M., Nonima, M. N., & Toruan, P. L. (2021). Efek Waktu Milling Silika Abu Sekam Padi sebagai Filler Aspal Pen 60/70 terhadap Sifat Fisis dan Sifat Termal. Jurnal Rekayasa Mesin, 16(3), 401. https://doi.org/10.32497/jrm.v16i3.3055.

Putra Jaya, R., Rosli Hainin, M., Abdul Hassan, N., Yaacob, H., Khairul Idham Mohd Satar, M., Naqiuddin Mohd Warid, M., Mohamed, A., Ezree Abdullah, M., & Irwan Ramli, N. (2018). Marshall stability properties of asphalt mixture incorporating black rice husk ash. Materials Today: Proceedings, 5(10), 22056–22062. https://doi.org/10.1016/j.matpr.2018.07.068.

Putra, A., Mulyono, T., & Chrisnawati, Y. (2020). Kajian Parameter Marshall Dengan Menggunakan Limbah Serbuk Kerang Hijau Sebagai Filler Campuran Lapis Aspal Beton. Menara: Jurnal Teknik Sipil, 15(1), 1–8. https://doi.org/10.21009/jmenara.v15i1.18124.

Witri, P. R. (2022). Pengaruh Penambahan Abu Sekam Padi Sebagai Filler Pada Campuran Aspal Beton AC-WC. Abstract of Undergraduate Research, Faculty of Civil and Planning Engineering, Bung Hatta University, 1(1), 1–2. https://ejurnal.bunghatta.ac.id/index.php/JFTSP/article/view/20631.

Sargin, S., Mehmet Saltan, Nihat Morova, Sercan Serin, & Serdal Terzi. (2013). Evaluation of rice husk ash as filler in hot mix asphalt concrete. Construction and Building Materials, 48, 390–397.

Hermansyah, Isnan, A. F., & Yanti, F. (2022). Karakteristik Marshall pada Campuran Aspal HRS-WC Menggunakan Abu Sekam Padi. Jurnal Manajemen Teknologi Dan Teknik Sipil, 5(1). https://doi.org/10.1016/j.ijprt.2017.10.007.A.

Sari, M., Montolalu, W., Arifin, W., Syarkawi, M. T., & Anies, M. K. (2019). Pengaruh Variasi Lama Perendaman Terhadap Durabilitas Campuran Aspal dengan Abu Sekam Kayu pada Perkerasan Asphalt Concrete – Wearing course. Journal Ilmiah Mahasiswa Teknik Sipil, 1(2), 218–225.

Cahyo, S., & Sylvia Indriani. (2018). Pengaruh Filler Abu Kayu Jati terhadap Kinerja Campuran AC-WC Menggunakan Metode Warm Mix Asphalt. Forum Studi Transportasi Antar Perguruan Tinggi Ke-21.

Kalalimbong, A. (2014). Kerusakan Jalan Akibat Pengaruh Kalsium Oksida Pada Ruas Jalan Nasional Padalarang-Cianjur. Jurnal TEKNOLOGI, 11(1), 1187–1192




DOI: http://dx.doi.org/10.30659/jacee.7.2.%25p

Refbacks

  • There are currently no refbacks.


JACEE (Journal of Advanced Civil and Environmental Engineering)
is published by Fakultas Teknik Universitas Islam Sultan Agung, Indonesia, in collaboration with Federation Internationale du Beton (fib).
Jl. Raya Kaligawe Km.4, PO BOX 1054/SM Semarang 50112
Website: https://ft.unissula.ac.id/
Email: jacee@unissula.ac.id

ISSN: 2599-3356 (Online)
DOI : 10.30659/jacee

This work is licensed under a Creative Commons Attribution 4.0 International License

Get a feed by atom here, RSS2 here and OAI Links here

slot88dana4d